arrow_top
Banner
How to improve the production efficiency of SMT patch proofing manufacturers
- 2020-04-26-

How to improve the production efficiency of SMT patch proofing manufacturers

inSMT patch proofingAmong manufacturers, surface assembly technology is a very popular technology in the electronics assembly industry. Its rapid development has driven the development of high-tech equipment placement machines for mechatronics. SMT engineers must not only master the use and maintenance of the placement machine, but also constantly sum up experience in the work and find ways to improve production efficiency. Here are several ways to improve production efficiency in SMT patch proofing manufacturers.

SMT贴片打样.png

One is the improvement of the placement machine. Among SMT patch proofing manufacturers, high-precision placement machines have become one of the main forces of our production line due to their high speed and low throwing rate. However, the 25 8mm tape feeders it is equipped with are often stuck at the front end of the reel tape due to design problems, causing it to enter a dead corner, causing the tape to not move forward during the placement process, and the suction nozzle cannot pick up the material and stop reporting an error. . Solution: SMT patch proofing manufacturers can design a suitable workpiece model at the feeding port of the tape feeder according to the direction of the taping displacement. In the riveting feeder, this baffle-like workpiece can correctly guide the taping smoothly. Enter the guide groove. The improved feeder realizes "zero" cassette in production, maintains the continuity of operation, reduces throwing, saves costs, and greatly improves the production efficiency of SMT patch proofing manufacturers.

Customized special product carts to improve the feeding link. In SMT patch proofing manufacturers, the feeder operation link of the placement machine takes too long and needs to be improved. In order to standardize the operation and save time, the placement proofing factory has specially ordered two feeder trolleys. It has two purposes: one is to store the repetitive material feeder waiting to be used, and the other is to store commonly used products such as "sea frequency conversion" feeder. Before improvement, SMT patch proofing manufacturers use the feeder every time they produce It is stacked in a mess on the workbench, inconvenient to check the materials, and low efficiency. After the improvement, all the feeders are placed on the cart in an orderly manner, which not only meets the 6S management requirements of the production site, but also greatly improves the SMT Production efficiency of SMD proofing manufacturers.

02.png